Double tap to zoom
- Every tine is constructed from one piece of 1/2ˮ Grade 50 steel, from tip to top brace, to add rigidity.
- NitroSteel® cylinder rods and Teflon® coated bushings on hinges.
- Known clearance issue on John Deere® G-Series loaders (330G, 331G, 332G, and 333G).
|Overall Bucket Width (Inches)||85.5|
|Bucket Depth (Inches)||36.9|
|Bucket Height (Inches)||20.3|
|Number of Tines (With Sides)||10|
|Space Between Tines (Inches)||8.9|
|Tine and Side Plate Thickness (Inches)||0.5*|
|Grapple Jaw Thickness (Inches)||0.5*|
|Grapple Jaw Opening (Inches)||35.2|
|Approximate Weight (Pounds)||845|
|Recommended Loader Capacity||Less than 2400 pounds|
*Jaw and Tine Material is Grade 50 Plate (50,000 Minimum Yield Strength).