Pequea CX551 Hydraulic Feed
CX-Series CX551 Hydraulic Feed
Overview:
The Pequea CX Series hydraulic feed wood chippers have the strength to handle any material that will fit in the generous 5" or 8" material opening. The CX hydraulic feed chippers are PTO driven but feature a high-speed rotor design traditionally only available on commercial engine drive chippers for greater power and e... + Read More
Features
- Hydraulic feed
- Accepts material up to 5" in diameter
- 3 Point Hitch PTO Drive (25-60 HP Required)
- 360 degree chip chute rotation
- 4 reversible knives mounted with recessed bolts (no threaded knives)
- Adjustable and reversible chip anvil
- Easy to remove shields access the 3 cogged v-belt drive
- High Speed 1700 RPM rotor requires less horsepower to operate while throwing the chips 10-15 feet farther than direct drive models
- The rotor shaft is attached with a tapered bushing which perfectly balances the rotor, making this the smoothest running chipper on the market
- 775 lbs.
Specifications
| Specifications | CX551 |
| Chip Opening | 5 1/2" x 8" |
| Drive System | PTO |
| Transport | 3 Point Hitch |
| PTO Category | Cat. 1&2 |
| HP Required | 35+ |
| Belts | 3 BX |
| Rotor Size | 165 lbs. |
| Knives** | (4) 2 1/2" x 3 1/2" x 5/16" |
| Knife Bolts | 3/8" Recessed & Hardened Bolts |
| Shear Bar/Anvil | Adjustable Hardened Anvil |
| Feed System | Hydraulic |
| Hyd. Requirements | 6 GPM |
| Self Contained Hyd. System | Opt. |
| Feed Roller | 15" |
| Hopper Opening | 28" x 28" |
| Feed Height | 21" |
| Chip Chute | 360º Rotation |
| Finish | Industrial Two-Part Urethane |
| Weight (lbs.) | 775 |
