-
M-F: 8:00 am - 5:00 pm
Saturday: 8:00 am - 12:00 pm -
M-F: 8:00 am - 5:00 pm
Saturday: 8:00 am - 12:00 pm
Land Pride RCF3684
RCF3684 Rotary Cutters RCF3684
Overview:
The Land Pride RCF3684 Rotary Cutter is a brute among single-spindle cutters. It features a 190 HP gearbox capable of cutting heavy grass and weeds, row crop stubble, thick brush, and small trees up to 4" in diameter and has a cutting height range of 2" to 12". The RCF3684 features a smooth top design for easy cleaning... + Read More
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures. |
| 5 Year gearbox warranty | A rugged heavy built gearbox capable of handling heavy cutting applications. Shows Land Pride's confidence in gearbox integrity. |
| Cat. 5 driveline with 4-plate slip-clutch | Slip-clutch driveline offers convenience for continual work. |
| Cat. II and III 3-Point Hitch Options with Quick Hitch Capability | Fits a wide variety of tractors. Quick Hitch provides for fast hook-up. |
| Dual position clevis type 3-Point floating top link | Permits deck to follow the terrain for an even cut. |
| Lower clevis type 3-Point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Pull-type hitch option | Fits older tractors without a top link and smaller tractors without enough lift capacity. |
| 84" Cutting width | Wide cutting width, reduces cutting time in the field. |
| Heavy deck construction with 3/16" deck top & 1/4" side skirts | Strong heavy deck material for rugged use. Heavy side panels protects sides from debris being thrown against them from the blades. |
| Fully welded deck | Adds additional strength and deck integrity. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| 13 3/8" Deck height | Allows cutter to handle heavy cutting conditions. |
| 2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| High cutting capacity | Can cut brushy areas with saplings up to 4". |
| Skid shoes | Provides sidewall reinforcement and protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 3/16" Plate stump jumper | Standard round stump jumper slides over stumps, rocks, and debris. |
| High blade tip speed | Ensures clean cut. |
| 4" Dia. cutting capacity | Can aid in clearing brush. |
| Dual laminated tailwheels | Dual tailwheels offer greater stability in uneven terrain. Laminated material is long lasting in rough conditions. Can't go flat. |
| 1 1/2" Heavy-duty spindle on tailwheel (3-Point cutter) | Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. |
| Wheel bearings (Pull-type cutter) | Tapered roller bearing in cast iron hub. |
| Optional guarding | Protect against flying debris. |
Specifications
| Model Numbers | RCF3684 3-Point Type |
| Machine weight |
2,000 lbs. |
| Hitch |
Category lI or III with floating clevis |
| Pull type tongue weight | N/A |
| Cutting width | 84" |
| Overall width | 90 1/2" |
|
Deck height |
13 3/8" |
| Cutting height | 2" - 12" |
| Cutting capacity | 4" Diameter |
|
Recommended tractor power take-off |
70-190 HP |
| Power take-off Speed | 540 rpm |
| Gearbox |
1:1.21 Speed-up beveled gears, |
| Gearbox lubricant | 80-90W oil |
| Gearbox oil capacity | 10 pints |
| Deck construction | All welded deck |
| Deck material thickness | 3/16" |
| Side skirt material thickness | 1/4" |
| Skid construction | Replaceable bolt on skid shoes |
| Stump jumper / blade holder |
3/16" Round dish shaped bolt-on stump-jumper |
| Blades (2) |
1/2" x 4" Heat treated alloy steel |
| Blade bolts | Keyed with harden flat washers & lock nuts |
| Blade tip speed | 14,369 fpm |
| Driveline | ASAE category 5 with 4-plate slip clutch |
| Driveline protection | 4 plate slip clutch |
| Transport axle | Cushioned shock absorption |
| Rear deck height adjustment options | Ratchet jack or hydraulic cylinder |
| Tailwheel |
4" x 8" x 15" Laminated tire |
| Front guard | Optional: Rubber belting, single chain guard or double chain guard |
| Rear Guard | Optional: Single chain guard or double chain guard |
| Jack Stand | Jack stand on tongue of pull-type cutter |
| Model Numbers | RCF3684 Pull-Type |
| Machine weight |
2,104 lbs. With hydraulic adjustment |
| Hitch | Pull-type with clevis |
| Pull type tongue weight | 894 lbs |
| Cutting width | 84" |
| Overall width | 90 1/2" |
|
Deck height |
13 3/8" |
| Cutting height | 2" - 12" |
| Cutting capacity | 4" Diameter |
|
Recommended tractor power take-off |
50-190 HP |
| Power take-off Speed | 540 rpm |
| Gearbox |
1:1.21 Speed-up beveled gears, |
| Gearbox lubricant | 80-90W oil |
| Gearbox oil capacity | 10 pints |
| Deck construction | All welded deck |
| Deck material thickness | 3/16" |
| Side skirt material thickness | 1/4" |
| Skid construction | Replaceable bolt on skid shoes |
| Stump jumper / blade holder |
3/16" Round dish shaped bolt-on stump-jumper |
| Blades (2) |
1/2" x 4" Heat treated alloy steel |
| Blade bolts | Keyed with harden flat washers & lock nuts |
| Blade tip speed | 14,369 fpm |
| Driveline | ASAE category 5 with 4-plate slip clutch |
| Driveline protection | 4 plate slip clutch |
| Transport axle | Cushioned shock absorption |
| Rear deck height adjustment options | Ratchet jack or hydraulic cylinder |
| Tailwheel |
4" x 8" x 21" Laminated tire |
| Front guard | Optional: Rubber belting, single chain guard or double chain guard |
| Rear Guard | Optional: Single chain guard or double chain guard |
| Jack Stand | Jack stand on tongue of pull-type cutter |
