-
M-F: 8:00 am - 5:00 pm
Saturday: 8:00 am - 12:00 pm -
M-F: 8:00 am - 5:00 pm
Saturday: 8:00 am - 12:00 pm
- Home
- Used Equipment
- New Products
- Specials
- Departments
- Company Profile
- LOCATIONS
- Contact
Land Pride RCD1884
Double tap to zoom
RCD1884 Rotary Cutters RCD1884
Overview:
Land Pride's RCD1884 Dual Spindle Offset Rotary Cutter with its 84" cutting width, 10" offset to the right and 360 degree rotating tailwheels is ideal for clearing grass, weeds, and light brush up to 1 1/2" in diameter from areas in orchards and tree groves, under over-hanging hedge rows, or next to fence lines and guard railings. It is also well suited for operation on gentle slopes and mildly contoured approaches immediately adjacent to ponds, lakes, streams, drainage ditches, and roadways. The 2" to 12" cutting height makes it well suited for mowing pastures, set aside acres, and row crop fields.
The RCD1884 is compatible with 35 to 60 horsepower tractors and operates at 540 rpm PTO speed with a medium duty ASAE Category 3 driveline and a 2 plate slip-clutch for gearbox and driveline protection. The category I 3-point hitch is Quick Hitch adaptable. The standard stump jumper under each blade spindle slides over stumps, rocks and debris. - Less
Land Pride's RCD1884 Dual Spindle Offset Rotary Cutter with its 84" cutting width, 10" offset to the right and 360 degree rotating tailwheels is ideal for clearing grass, weeds, and light brush up to 1 1/2" in diameter from areas in orchards and tree groves, under over-hanging hedge rows, or next to fence lines and gua... + Read More
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| 5 Year gearbox warranty | Shows our confidence in the gearbox integrity. |
| Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
| Cat. 3 main driveline with 2-plate slip-clutch | 2-Plate slip-clutch protect driveline and gearboxes. slip-clutch is more convenient than shear bolt for continual work. |
| Shock absorbing flex-coupler between main and side gearboxes | Protects intermediate drive shaft and side gearbox from hard objects in the blade path. |
| 10" Deck offset to the right | Allows the operator to cut closer to bodies of water, drainage ditches, roadways and objects such as fence lines, guard rails, buildings and trees. |
| Lower clevis type 3-point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Fully welded 10 gauge deck | Fully welded deck adds additional strength to the deck. 10 Gauge decks can withstand more abuse than decks with lighter gauge. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| 11 5/8" Deck Height | Allows cutter to handle heavy cutting conditions. |
| 1 1/2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| Skid shoes | Provides sidewall reinforcement and protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| 1/2/" x 4" Blade bar | Heavy-duty blade bar adds support to stump jumper and gearbox output shaft. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| Stump jumper | Standard round stump jumper slides over stumps, rocks and debris. |
| Front and rear guarding | Protect against flying debris. Optional front rubber or single chain guarding. Standard rear metal band or optional rear extended metal guarding. |
| Optional 15" Laminated tailwheel 4" x 16' Molded rubber | Laminated material is long lasting in rough conditions and can't go flat. Can't go flat. |
Specifications
