Land Pride SSG2524

Double tap to zoom



Universal quick attach mounting system For quick and easy attachment.
8" Digging depth A good depth below the ground. Removes base of most trees.
Adjustable skid shoes Adjustable to fit all sizes of skid steers.
Pivoting discharge deflector Discharge deflector pivots up while cutting wheel is digging into the ground.
Welded on serrated step Good safe step for accessing skid steer operator’s seat.
High-speed cutting wheel Cuts faster with less vibration.
Permanent hose holders Hoses aren’t zip-tied to the frame. Zip ties can break over time.
Replaceable carbide cutting teeth Cutting teeth are easy to replace. Carbide tips for extra long life.
Hydraulic hose lines Hydraulic hoses absorb shock. Steel hydraulic lines crack from vibration.
Case drain hydraulic line Protects against component damage.
Keyed, tapered spindle on end of hydraulic motor Able to draw cutting wheel tight against the tapered shaft providing an excellent fit-up and less likely to shear the key off.
Cutting wheel designed with wheel puller access holes Makes it easier to pull the cutting wheel off of the motor spindle.
Attached rain tight manual holding tube Keeps manual with stump grinder for quick easy access. Manual won’t get wet.
Offset articulating arm Allow for optimum line-of-site from operator’s seat


Mounting Plate Quick Attach
Main Frame 6" x 6" x 1/4" Tube
Overall Mounting Width 48"
Overall Length 60"
Overall Weight 540 lbs
Drive And Control System Hydraulic motor with electric over hydraulic
Hydraulic Requirements 17 to 32 GPM
Articulate Cylinder 3" x 6" stroke with 1 1/4" rod dia.
Tilt Cylinder 3" x 6" stroke with 1 1/4" rod dia.
Hydraulic Lines & Hoses

3/4" I.D. Hydraulic hoses with crimp on cordura sleeve

1/4" I.D. Case drain hydraulic hose

Number of Cutting Teeth  
Straight 8 - Replaceable carbide teeth
Left-Hand 12 - Replaceable carbide teeth
Right-Hand 12 - Replaceable carbide teeth
Cutting Wheel Speed 590 to 1100 RPM
Cutting Arc 55 Degrees
Maximum Cutting Depth Below Ground 8"
Greasable Hinge Points Yes
Color Black
Outside Cutting Wheel Diameter 23 3/4"
Cutting Wheel Thickness 1/2"
Maximum Pressure Rating 3500 psi