Land Pride FM2584

Double tap to zoom

 

Features

Features Benefits
48", 60", 72", & 84" Cutting widths Wide selection of cutting widths to meet specific applications.
30-80 hp tractor Fits a large array of tractors to meet the needs of consumers, municipalities, and
landscapers.
Spring-loaded, self-indicating,
belt-tensioning system
(FM2560-FM2584)
Available on 60", 72", and 84" models.
Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes
maintaining proper belt tension easy, and increases belt life.
0"-6" Cutting height Variable cutting height allows operators to scalp the ground, or leave a 1" to 6" cut.
1", 1 1/2", & 2"
Blade cutting capacity
Ducksfoot blade can cut up to 1" small brush.
Heavy-duty Y blade can cut up to 1 1/2" brush.
Hammer blade can cut up to 2" small saplings.
Sealed heavy-duty tapered roller
rotor bearings
Sealed for protection from dust and debris.
Withstand shock loads and deflection from heavy use.
Reverse rotor rotation Brings the cut material up and over which allows it to be dispersed more evenly. Allows
material to be shredded completely
High knife tip speed Knife tip speed 12,046 fpm provides a clean cut, creates a vacuum effect when using
hammer or ducksfoot blades, and slices through saplings with great force when using
heavy-duty Y blades.
Full width rear access door Allows for easy access to blades and rotor for replacing blades and cleaning out debris.
Quick-change D-ring blade system Replace ducksfoot blades without any tools.
3- “5V” Section Powerband Belt Powerband belt distributes load evenly, which prevents the belts from jumping off the
drive when a shock load occurs.
Hitch offset: 8" for FM2548-60
10" for FM2572-84
The two position hitch allows the mower to be offset to the right for a closer cut
alongside buildings, fences, and roadsides.
Three blade options: ducksfoot,
hammer, heavy-duty Y
Three blade options to meet specific applications.
Accessible rotor Rotor can be removed by unbolting cover plates and bearings.
Grease zerks on end caps of
driveline cross journals
Intermediate and main driveline cross journals are easier to grease.
Standard removable roller scraper
mounted with only two bolts
Keeps roller clean for consistent cutting height in wet conditions.
Two bolt mounting makes it easy to remove to allow heavy dry cuttings flow freely over
the roller.
Front safety chains Protects operator and bystanders from debris.
Replaceable skid shoes Prevents wear on end panels from ground contact.

Specifications

Model Numbers FM2548
Weight of Standard unit with optional ducksfoot rotor 1236 lbs

Weight of optional rotors:

Rotor with ducksfoot blades

Rotor with heavy-duty Y blades

Rotor with hammer blades

Blade qty / weight

32 ea / 250 lbs

48 ea / 292 lbs

24 ea / 301 lbs

Optional brush rake assembly 62 lbs
Working width 84"
Overall width 96"
Drive cover height 33"
Rotor rpm 2450
Hitch Cat. I & II
Gearbox rating 80 hp
Driveline Cat. 4
Offset hitch Center or 10" Right
Blade tip speed 12,046 fpm
Blade attachment D-ring for ducksfoot blades, C-clamp for heavy-duty Y and hammer blades
Rotor bearings Spherical roller bearing
Brush rakes (standard) 11
Rotor diameter 5" With reinforcing bars
Rotor rotation Reverse
Cutting height 0"-6"
Cutting capacity

Ducksfoot: 1"

Heavy-duty Y blades: 1.5"

Hammer blades: 2"

Rear roller diameter 5.56"
Hood/deck thickness 10 Ga